Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
News:
Installed updated forum software, will make visual changes when possible
Home
Forum
Help
TinyPortal
Search
Calendar
Login
Register
d2au.com - the home of Australia's best 4x4xfar...
»
Vehicle Specific.
»
Accessories
»
New Chipped replacement ECU TD5?
User
Welcome,
Guest
. Please
login
or
register
.
September 05, 2010, 04:08:42 AM
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Stats
Members
Total Members: 323
Latest:
crochear
Stats
Total Posts: 2587
Total Topics: 567
Online Today: 11
Online Ever: 96
(April 25, 2010, 08:16:07 PM)
Users Online
Users: 0
Guests: 6
Total: 7
Please click on an ad to help pay the hosting costs... Thanks
« previous
next »
Print
Pages: [
1
]
Go Down
Author
Topic: New Chipped replacement ECU TD5? (Read 1130 times)
Fozzie
Board Browser
Posts: 2
New Chipped replacement ECU TD5?
«
on:
March 06, 2008, 01:51:17 PM »
Hi Guys a question from the new guy!
I have been mulling over this decision for a while. I have a 2000 TD5 with 240k on the clock, I get it serviced every 5k through a good operator. My wife is always on at me about wanting a quicker fourby so I have finally succumbed to the idea of a New replacement ECU Chip modification.
I have been told $700 from Peninsular Rangie which will give me approximately a 40% power increase and approximately 6% better fuel economy.
Thus making a miserly 0 -100 from 14.5 secs to 9.5 secs.
A little bit of research indicates that a larger intercooler will help if you are driving the car really hard a lot of the time. That's not what I really want it for, more like running fully loaded and holding a 100kph on the hilly sections.
Will a modification like this put my drivetrain at risk when pushing through the fun narley stuff with 33" Simex jungle trekkers?
My understanding is that this chipping does no harm to the engine, as the engine is deliberately held back due to UK/Au Emmissions tests?
Well $700 seems pretty cheap for that extra 40% does anybody have any experience or feedback or just plain good advice on this topic?
Cheers
Dave
Logged
LOVEMYRANGIE
Board Browser
Posts: 4
Gender:
New Chipped replacement ECU TD5?
«
Reply #1 on:
July 05, 2010, 08:06:09 PM »
Try Total Rover Tech
www.trt.net.au
or go to AULRO.com and pm Tombie2 for info.
Logged
MY93 RRC 3.9 Classic (my baby)
MY03 D2a TD5 Auto(my new baby)
S2a 109" custom trailer
A Classic, a Disco and a Series..... The Holy Landy Trinity!
Kered
City Commuter
Posts: 16
Gender:
Re: New Chipped replacement ECU TD5?
«
Reply #2 on:
July 08, 2010, 04:07:49 PM »
Peninsula Rangie is a good operator and he knows what he is doing, I also use his services for my D2. I recommend him to everyone with a landy.
There is plenty of guys out there with this program upgrade that they do at PR, Most good landy mechanic's and some bad ones also do this modification. I have never heard of anybody suffering engine failure after this is done.
I am sure however that Damo told you most D2's with this mod end up breaking the exhaust manifold studs and they end having to drill the studs out in the head and replace them with larger units. But this happens no matter who does the program changes as the exhaust gas temperature rises and causes the distortion. There is no proof that an intercooler upgrade will prevent this.
I would personally be more worried about the auto oil overheating with towing large loads or turning large tyres. I don't tow heavy loads or have the chip done yet and I have already had an auto rebuild.
I hope to be getting the chip net month and can't wait for the big grins it will put on my face.
Logged
discoveraus
Country Cruiser
Posts: 35
Gender:
Re: New Chipped replacement ECU TD5?
«
Reply #3 on:
July 24, 2010, 05:04:17 PM »
Hello Fozzie,
I have had a upgrade chip fitted to my D2 for about three years now and have mixed feelings about them.
My upgraded chip was a replqcement chip which was resoldered into the ECU and then programmed with updated fuel settings. The power improvement was terric, the D2 drove really well and I was very happy. After 11 months the D2 would not start one morning, after trying to solve the problem for 3 days I had it towed to the ECU supplier, Dead chip, lucky I was still under warranty.
The replacement ECU was fitted for another two years until about two weeks ago, I was towing my camper trailer into an outback cattle station (Tamala) near Denham at Shark Bay WA. We were 8 km off the road to Steep Point and about 100 metres from our camping spot at Three Bays when the fires went out. Dead stop in the middle of nowhere, we arranged a lift 13 km. back to the homestead, rang RAC and arranged to be rescued and had to tow the D2 and Camper back to the homestead before RAC would pick us us the next morning.
After a 450 km tow of both the D2 and the camper back to Geraldtom WA the fault was a dead ECU, We were able to obtain a standard prgram ECU that same day and with a few other fixes were back on the road the next day.. The landy mechanic said he has nevver seen a standard ECU fail but has seen several rechips die.
If you want reliability, dont change it in my opinion. Towing 450 km would have been expensive and messy to arrange without the RAC. I will be having words with supplier when I get home, mark my words.
regards.
Ross
Logged
Winaje
Administrator
Posts: 472
Gender:
Re: New Chipped replacement ECU TD5?
«
Reply #4 on:
July 27, 2010, 04:03:06 AM »
Will be very interested to know the outcome Ross, also to know the brand of the chip, even if only in a PM...
Logged
Kind Regards, Will Church
discoveraus
Country Cruiser
Posts: 35
Gender:
Re: New Chipped replacement ECU TD5?
«
Reply #5 on:
July 27, 2010, 11:21:19 AM »
Hello Wil,
The label on the ECU is Triumph Rover Spares P/L. I could not guess where they get the unit programmed. The casing has been prised apart ( it looks like a screwdriver job ) and then resealed after the new chip has been soldered into the printed circuit board.
The latest d2 ecu is a fully reprogrammable unit and does not need to be fiddled with to upgrade the fuel settings, apparently LR even have a factory upgrade program which can be reprogrammed by Testbook without pulling the casings apart. If you use a reprogammable ecu, or an external add on unit, it would not reduce the ecu reliability.
I installed my chip at 120000 km. I am now upto 190000 km. without any resulting mechanical failures that I could blame on the upgraded ECU. I tow a Kimberley Kamper about 15000 km per year on bitumen and off road, the auto transmission handles it easily without overheating or complaining.
My power was up considerably, towing was improved enormously but fuel consumption was also up by about 3 litres per 100km. Dont expect to win any drag meets though as it is all torque increase.
regards
Ross
Logged
discoveraus
Country Cruiser
Posts: 35
Gender:
Re: New Chipped replacement ECU TD5?
«
Reply #6 on:
August 03, 2010, 02:18:54 PM »
Hello all,
I have sent an email to my rechip supplier / installer and he expressed total surprise at the failure. They were so surprised that they have offered to replace the ECU completely at no cost when I return to Melbourne in September.
I cant complain about the service in offering the replacement ECU at nearly 3 years after the inital sale but I am still unsure about putting my D2 reliability at risk again. It was an awful feeling when the D2 just stopped at the other side of nowhere (not even in the middle of nowhere) with no alarms or warnings.
Performance inprovement was great, reliability
. I miss the power already.
regards
Ross
Logged
Print
Pages: [
1
]
Go Up
« previous
next »
d2au.com - the home of Australia's best 4x4xfar...
»
Vehicle Specific.
»
Accessories
»
New Chipped replacement ECU TD5?
Recent
netpal.noor has joined
by
Winaje
[September 01, 2010, 05:16:33 PM]
crochear has joined
by
Winaje
[August 31, 2010, 08:12:02 PM]
jarvs has joined
by
Winaje
[August 29, 2010, 10:07:36 AM]
LR25TD has joined
by
Winaje
[August 29, 2010, 07:08:38 AM]
Fuel Filter protection
by
hamish71
[August 23, 2010, 09:26:29 AM]
CLISSON has joined
by
Winaje
[August 10, 2010, 02:49:59 PM]
Welcome to Jamesm42
by
Winaje
[August 04, 2010, 02:00:44 PM]
Advertisements
TinyPortal 1.0 beta 5-1