« previous next »
Pages: [1]   Go Down

Author Topic: Ian's money pit  (Read 1556 times)

Offline ianswalkingthedog

  • Country Cruiser
  • **
  • Posts: 41
Ian's money pit
« on: September 23, 2005, 12:42:18 PM »
It's about time that I listed all my little bits, but then I might scare myself with the cost!

2003 TD5 Auto
OME 50mm lift (now sagged at the front to about standard)
TJM bar
Dual battery
265x75R16 BFG AT's for the road
33x10.4x16 for fun
ARB lockers front and rear
4.11 C&P's
Maxidrive halfshafts front and rear
D1 driveshaft and standard UJ on the rear.

I dont have a picture as it's not that flash, but thats the idea - stealth. In action there is a couple of videos around which Lawrance took, probably the most interesting is one called '20 Warp speed Ian'. Its on this site somewhere, not sure exactly Will might be able to help.
Logged
an G.

TD5 '03MY (bent a little bit)

Offline brooksy

  • Mud Masher
  • ****
  • Posts: 114
Ian's money pit
« Reply #1 on: September 23, 2005, 05:21:32 PM »
Throw on a set of Dobinson springs on the front. That will fix it ,at the right price too, $170/ pair C51-052, I got 30mm spacers also for free, excellent :lol:  :lol:

brooksy
Logged
03 SE V8
Custom bar work, 4" lift, 33", locked.

Custom 4x4 Fabrications
(07) 4194 1144  mob: 0400 443 802
custom4x4fabrications@westnet.com.au

bitdist

  • Guest
Ian's money pit
« Reply #2 on: September 23, 2005, 05:55:48 PM »
Or browns springs at $130 per pair   :wink:   And he will make them as you like and adjust them for nothing

Tim
Logged

Offline ianswalkingthedog

  • Country Cruiser
  • **
  • Posts: 41
Ian's money pit
« Reply #3 on: September 25, 2005, 05:57:09 PM »
I'll design my own once I have done a little measurement then get Browns to make them for me. I favour soft rate springs and long travel.
Logged
an G.

TD5 '03MY (bent a little bit)
Pages: [1]   Go Up
« previous next »