Author Topic: Indestructable...........NOT  (Read 2215 times)

Offline walker

  • Mud Masher
  • ****
  • Posts: 133
Indestructable...........NOT
« on: September 02, 2004, 07:38:32 PM »
This embarrassing moment was a case of me acting in my normal impulsive self. Rushing in........and paying for it later.

The Scene is Wombat State Forest.
David Danks had taken us on a little diversion to look at a "sawdust mound" but had become bogged. There were 2 ways in so I said, "I'll just drive through that small puddle to get in front of you and pull you out."

Now the Disco had exactly 524km on the clock and no snorkel.

I went in the first time, almost got bogged but managed to back out. I then decided to give it another go with a bit more momentum. This managed to butt a wave of mud halfway up the windscreen.

I backed out, david winched out and we continued. About 10min later the car was running like a dog (or like a diesel take your pick)
We pulled open the airbox to find it full of water and mud. After a bit of mucking around we found it did not run with the MAF sensor plugged in.
We unplugged it and drove home with a piece of cloth instead of an airfilter.

I now have a snorkel!




Adam

"Here's to alcohol, the cause of—and solution to—all life's problems."  Homer Simpson

Offline Slunnie

  • Global Moderator
  • *
  • Posts: 218
    • http://www.slunnie.com
Indestructable...........NOT
« Reply #1 on: September 02, 2004, 08:22:23 PM »
:lol: Love that number plate salute.
Cheers
Slunnie from Simba


Discovery TD5, Landy IIa V8 100", Landy II ute, Rangie.

  • Guest
Indestructable...........NOT
« Reply #2 on: September 06, 2004, 05:55:57 AM »
Yeah - I have lost 2 number plates in similar cirmcumstances..All on the ARB bull bar.. The water gets behind it somehow and really rips them off.

Andrew

Offline Winaje

  • Administrator
  • *
  • Posts: 452
  • Gender: Male
    • http://www.d2au.com
Indestructable...........NOT
« Reply #3 on: September 06, 2004, 06:00:57 AM »
What can I say, TEK screws...
Kind Regards, Will Church


  • Guest
Indestructable...........NOT
« Reply #4 on: September 06, 2004, 06:02:27 AM »
Yeah - I figured 4 bolts would do the job...NOT

Offline Winaje

  • Administrator
  • *
  • Posts: 452
  • Gender: Male
    • http://www.d2au.com
Indestructable...........NOT
« Reply #5 on: September 06, 2004, 08:06:57 AM »
wow, ok...
As you know I have got the standard bumper, and my front plate is bent under and anchored with 6 TEK screws...
Kind Regards, Will Church